heating pipe
英 [ˈhiːtɪŋ paɪp]
美 [ˈhiːtɪŋ paɪp]
供暖（加热）管
双语例句
- Significance on the dissipating heat amount of the heating pipe in designing
供暖管道散热量在设计工作中的重要性 - The heating pipe is arranged between the corresponding inside walls of the inner water tank and the outer water tank.
所说加热管处于内水箱与外水箱的相应内壁之间。 - The expert KBS of heating pipe network failure diagnosis system was established via the results of failure simulating experiments.
通过对故障模拟实验结果的分析，进一步建立起供热管网故障诊断的系统专家知识库。 - Discusses the selection of floor area and heat release per unit floor area for heating pipe laying, and presents some primary suggestions for project design.
探讨了敷设加热管的地面面积和单位地面面积散热量的选取，提出了初步建议，供设计时参考。 - Heating pipe for fuel oil tank leaked on the flange position which under the floor front the boiler, to be renewed.
在锅炉前部底处燃油柜中加热管的法兰盘处漏，需换新。 - Besides, each vacuum pipe is further equipped with a long electric heating pipe, a temperature and water level probe and a superconductive airflow pipe.
在其中的真空管内，还安装有长电加热管、温度水位探头和超导气流管。 - Those products are widely used in the petrochemical industry, miners, smelting, aerospace, marine terminals, power electronics, heating pipe, and other fields.
本公司生产的产品广泛应用于石油化工、矿工冶炼、航天航空、船舶码头、电力电子、供热管道等领域。 - Stainless heating pipe, high efficiency in heating, much more macrobian comparing with other kind of heating pipe.
不锈钢加热管，热效能高，使用寿命是普通加热管的数倍。 - The utility model further can be used for water supply and heating pipe outer joints, and thereby the utility model is versatile in use.
本实用新型可以用于供水和供暖的水管外接口，用途广泛。 - Manual-adjustment of heating pipe network will be under low efficiency, poor accuracy and more inert, and ultimately these will lead to low-efficiency and poor-security of central-heating.
采用人工调节，效率低、正确性差、惰性强，终极导致供热效能低、安全性差。 - Technology: flange type of heating is heating pipe welding flanges from fixed.
工艺：法兰式加热管是由加热管与法兰焊接固定而成。 - Buried heating pipe; Force computation; Module; Software;
供热管道；受力计算；模块；软件； - A heat sink is substituted with the vane type electric heating pipe in wind tunnel.
风道内以散热器取代翅片式电加热管； - The heating mode adopts such forms as electric heating pipe and infrared ray.
加热方式可采用电热管、红外线等形式。 - The failure reasons and prevention measures of corrugated expansion joint in heating pipe network
供热管网中波纹膨胀节失效原因和预防措施 - According to he calculation and economy analyses of heating pipe, this paper suggests that heating system design should consider the pipe heat dissipating capacity to reduce engineering cost.
通过对采暖管道热量的计算和经济分析，建议在采暖系统设计时考虑管道的散热量，以降低工程造价。 - Adopting the cross design determines the optimal recipe of the special material for PE heating pipe.
采用正交设计确定了PE采暖管材专用料最佳配方。 - The paper analysed the causes that the heating pipe of the electric steam boiler was broken, amd put forward the design plan and executable ways that the protective system was installed on the boiler.
本文针对电热蒸气锅炉加热管烧坏的原因进行了分析，提出了在电热蒸汽锅炉上加装保护系统的设计方案及实施方法。 - The work principle and hardware component of the multipoint real-time monitoring system for heating pipe network are introduced.
介绍了一种热力管网多点实时监测系统的工作原理和硬件组成。 - Complex expansion joint is widely used in the heating pipe system to absorb the three dimensional movement.
复式膨胀节是热力管道系统中广泛用于吸收三向热位移的一种常用设备。 - This paper analyzes corrosion actuality and its harm in heating pipe, and brings forward anti-corrosion measure in maintenance work.
本文针对目前水暖系统中管道腐蚀现状及其危害进行了分析，并对工程的防腐及具体维护管理工作提出了具体措施。 - According to the principle of thermal equilibrium and piping thermorytic characteristics, the relationship between the flow velocity in the heating pipe and the greenhouse climate has been set up.
根据热平衡原理和管道散热特征，得到了热水管道加热时流速与温室环境温度的关系，建立了温室温度的控制模型。 - Electric heating pipe should be separated from pickling solution after operation to avoid electrochemical reactions.
作业后将电热管与酸液脱离，防止电化学反应。 - Analyses the corrosion kind and reasons of the heating pipe network, introduces corrosion protection methods and operational means during designing, operating and stopping using of pipe network of hot water.
分析了供热管网腐蚀的种类、原因，介绍了热水供热管网在设计、运行及停用期间的防腐方法和操作手段。 - Energy-saving horizontal multicompartment fluidized bed dryer with internal heating pipe is used, using hot air or hot water as heat medium;
使用气柜回收未反应单体，用节能型带内热管的多室卧式流化床干燥器（以热风和热水为干燥热源）； - Through theoretical analysis and practical test, the formula of the coefficient of heat transfer of the heating pipe was obtained, and the reliability and the influential factors of the formula were analyzed.
通过理论计算与实际测试，得出了散热管道传热系数的实验公式，并分析了可信性与影响因素。 - The auto fender-guards 'structure characteristics were analyzed. The injection mould structure for the plastic part was designed. The feeding system of the mould, the calculation of the heating pipe power, the design of the core-pulling mechanism and the resetting mechanism were introduced.
分析了汽车保险杠结构特点，设计了该塑件注射模结构，介绍了该模具浇注系统、加热管功率的计算、抽芯机构及复位机构的设计。 - Design and application of central heating pipe
集中供热管道的设计与应用 - This article studies the development of the software used for the water power computation and the water power balanced system of the heating pipe network.
本文研究-供热管网水力计算和水力平衡系统的软件开发工作。 - By the MATLAB neural network toolbox, we programmed heating pipe network security evaluation model.
运用MATLAB神经网络工具箱，我们编程得到供热管网安全性评价模型。